Medium speed, medium contrast, fine grain, coaterless, black and white print film.

Special Treatment:

Processing the film for longer than 3 minutes may damage the print surface. At temperatures above 75°F (24°C), film should not be processed for longer than one (1) minute for optimum image stability. Processing affects contrast and density to some extent. A picture processed for too short a time will have dull grays, mottle and little contrast. If maximum density is required, the processing time may be extended by 15 seconds (for example, process for 45 seconds rather than 30 seconds). This may increase the contrast and density, but may also result in some loss of gray.

Specifications:

Film Speed - 100 ISO/ 21 DIN
Format - 3 1/4 x 4 1/4 in. (8.5 x 10.8 cm) Pack
Film Image Area - 2 7/8 x 3 3/4 in. (7.3 x 9.5 cm)
Finish - Glossy
Exposures per Unit - 10 frames per pack/2 packs per box
Development Time - 30 seconds at 75°F

| BACK |